Epson SC-R5000 Series User Manual page 10

SC-R5000 Series/SC-R5000L Series User's Guide
O
Status lamp
The color indicates the network's communication speed.
Red : 100Base-TX
Green : 1000Base-T
P
LAN port
Connects the LAN cable. Use a shielded twisted pair cable (category 5 or higher).
Q
Maintenance cover (right)
Open this when replacing the wiper unit or when cleaning around the caps. Normally closed when using the
printer.
"Cleaning the anti-drying caps" on page 80
U
"Cleaning the Suction Cap" on page 83
U
R
Control panel
"Control panel" on page 16
U
S
Signal lamp
The status of the printer is indicated by whether or not the three color lamps are lit or flashing. When all of the
lamps are off, the printer is off.
The following explains the basic meanings for the color of the lamps.
Red : Cannot print as an error has occurred.
Yellow : The printer is being operated while a warning message is displayed, maintenance is being
performed, or the printer is paused.
Green : Ready to print or currently printing.
The combination of lamp colors and whether they are lit or flashing provides detailed information about the
status of the printer.
See the following for more details on understanding the signal lamp.
"Understanding the Signal Lamps" on page 25
U
T
Media loading lever
Once media has been loaded, move the media loading lever to the front to press down on the media. Move the
media loading lever to the back to release the media prior to removal.
U
Printer cover
Open when loading media, cleaning the inside of the printer, or removing jammed media. Normally closed
when using the printer.
Introduction
10