Operating Procedure - Epson SC-R5000 Series User Manual

SC-R5000 Series/SC-R5000L Series User's Guide
E
Preheat Start/Stop
Each heater starts heating when a job is sent, and printing starts when all heaters reach a set temperature.
Press Preheat Start to start pre-heating each heater, and then the Pre-heater and platen heater maintain a con-
stant set temperature. The curing heater maintains a standby temperature.
Pre-heating allows you to start printing quickly once a job has been sent.
You can start/stop pre-heating for all heaters each time you press this area. Additionally, all heaters turn off
after the time set in Heater Off Timer in the settings menu has elapsed. Heating starts when a print job is sent,
but you can still press Preheat Start if necessary.
Also, if Heater from Temperature is set to Off in the settings menu, pressing Preheat Start does nothing and
pre-heating does not start. Heaters that are set to Off do not heat up even if a job is sent. You can make Heater
settings for each heater.

Operating procedure

The black background area on the home screen and the startup adjustment screen does not respond even if you
press it. When you press the gray tiled area in the operation area, the screen or the value changes.
Depending on the printer's operating status, you may not be able to perform the function for every button
displayed at the top of the screen. If the function is unavailable, the icon is grayed out and the button does not respond.
Operation areas do operations when pressed. However, when a scroll bar is displayed as shown below, you can
scroll the screen by moving (sliding) your finger up and down on the screen. You can also scroll by pressing on the
up and down icons on the scroll bar.
Introduction
24