Epson SC-R5000 Series User Manual page 104

SC-R5000 Series/SC-R5000L Series User's Guide
Item
Media Back Feed after Curing
Heater Warm Up Additional Time
Print Head Warm Up
Platen Gap
Feeding Tension
Paper Suction
Media Feed Speed Limitation
Pressure Roller Load
Skew Reduction
Roll Winding Direction
Stick Prevention
Skip Wrinkled Media
Periodic Cleaning
Print Quality Adjustment Temperature
Remaining Amount Management
Remaining Amount Management
Remaining Amount
Remaining Alert
Maintenance
For more information on these items, see U
Item
Print Head Nozzle Check
Print Position
Nozzle Check Pattern
Print Head Cleaning
Cleaning(Light)
Cleaning(Medium)
Cleaning(Heavy)
Cleaning the Maintenance Parts
Replace Waste Ink Bottle
Control Panel Menu
Parameter
Half Way, Complete, Off
0 to 10 minutes
On, Off
1.7, 2.0, 2.5
Lv1 to Lv4
Lv0 to Lv10
On, Off
Weak, Medium, Strong
On, Off
Printable Side Out, Printable Side In
On, Off
500 mm, Off
30 to 180 minutes
40 to 110 °C (104 to 230 °F)
On, Off
1.0 to 999.9 m (3.3 to 3280.5 feet)
1.0 to 15.0 m (3.3 to 49.2 feet)
"Maintenance menu" on page 118
Parameter
Right, Center, Left
Standard, Quality Check
All Nozzles
Select Nozzles, All Nozzles
Anti-Drying Caps, Around the Head, Suction Cap, Flushing Pad,
Media Cleaner
104