Print Lengths By Pass Number And Creating A Job; Table Of Print Lengths By Pass Number; Creating A Job - Epson SC-R5000 Series User Manual

SC-R5000 Series/SC-R5000L Series User's Guide

Print Lengths by Pass Number and Creating a Job

Table of Print Lengths by Pass Number

Number of Media width
Passes
54 Inches or Less
1 pass 253.7 m (832.3 ft.)
4 pass 70.4 m (230.9 ft.)
5 pass 56 m (183.7 ft.)
6 pass 43.1 m (141.4 ft.)
9 pass 31 m (101.7 ft.)
14 pass 19.5 m (64 ft.)
20 pass 13.5 m (44.3 ft.)
26 pass 10.7 m (35.1 ft.)
35 pass 7.8 m (25.6 ft.)

Creating a job

Take one of the following actions if the print length exceeds three hours.
❏
If the result of nesting jobs in RIP or Step and Repeat is over three hours, divide the nested jobs into multiple
jobs within the three hour time window, or set the Layout Area Size in Step and Repeat to a print length
within the table above.
❏ If a single job takes more than three hours, you can split the image into multiple jobs by using the cropping
function.
❏ If a single job takes more than three hours but you do not want to split the image, print in a faster print mode
to finish printing within three hours.
Appendix
Up to 64 Inches
228.8 m (750.6 ft.)
62.7 m (205.7 ft.)
49.9 m (163.7 ft.)
38.5 m (126.3 ft.)
27.7 m (90.9 ft.)
17.4 m (57.1 ft.)
12.1 m (39.7 ft.)
9.5 m (31.1 ft.)
6.9 m (22.6 ft.)
137