Epson SC-R5000 Series User Manual page 20

SC-R5000 Series/SC-R5000L Series User's Guide
Depending on the status of the ink supply unit, the display of the bar changes as shown below.
: Ink is low. You need to prepare a new ink supply unit.
If you are using the SC-R5000L Series, the ink supply automatically switches to another ink
supply unit of the same color, so make sure that the ink supply unit that is being switched to
has enough ink.
: Ink is expended. Replace the old ink supply unit with a new one.
If you are using the SC-R5000L Series, when ink is expended, the ink supply automatically
switches to another ink supply unit of the same color.
: It is time to shake the ink supply unit. Remove the ink supply unit tray for any ink unit whose
LED light is flashing blue, and then shake the tray. Do not pull out the ink supply unit tray if
the light is lit blue.
: Only displayed when using the SC-R5000L Series.
An ink supply unit tray without an ink supply unit attached has been installed in the ink unit.
Attach the ink supply unit as soon as possible, otherwise the ink unit could malfunction.
: Only displayed when using the SC-R5000L Series.
Make sure all of the ink unit lock switches are locked, and then follow the instructions
displayed on the screen.
: The cleaning ink supply unit is installed.
Waste Ink Bottle status
Indicates the approximate amount of space available in the waste ink bottle. The bar goes lower as the
amount of remaining space decreases. The letters under the bar are identification abbreviations of the
waste ink bottles. The meanings of the abbreviations are shown below.
: Waste ink bottle for color ink
: Waste ink bottle for Optimizer (OP)
Depending on the status of the waste ink bottle, the display of the bar changes as shown below.
: The waste ink bottle is almost full. Ready a new Waste Ink Bottle.
Wiper unit status
Indicates the approximate amount of wiper unit remaining. The bar goes lower as the remaining ink
runs low.
: The wiper unit is running low, so you need to prepare a new wiper unit.
Introduction
20