Epson SC-R5000 Series User Manual page 107

SC-R5000 Series/SC-R5000L Series User's Guide
Item
Error Tone
Volume
Repeat
Sound Type
Sleep Timer
Date/Time Settings
Date/Time
Time Difference
Control Panel Menu
Parameter Explanation
0 Sets the volume and the repetitions of sounds when an error occurs and
printing cannot continue.
1
2
*
3
Off
*
Until Stopped
* Sets the type of sounds. Sounds that are easy to hear in the printer's
Pattern1
operating environment can be set.
Pattern2
* Set how long before the printer enters sleep mode when no print jobs
1 to 240 (15 )
are received and no errors are detected. In sleep mode, heaters turn off,
the control panel turns off, and the internal motors and other
components consume less power.
To reactivate the control panel display, press any button in the control
panel except P. The control panel display will however turn off again if
no operations are performed for another 30 seconds under these
conditions. The printer and heaters are only fully reactivated when a
print job is received, the media loading lever is used, or another
operation involving printer hardware is performed.
Set the printer's built-in clock. The time set here is displayed on the
Home screen. It is also used for job logs and the printer's status as
shown in Epson Edge Dashboard.
-12:45 to +13:45 Set the time difference with coordinated universal time (UTC) in 15
minute increments. In network environments with a time difference, set
this as necessary when administrating the printer.
107