Aastra Ascotel IntelliGate A150 System Manual page 47

Settings in "Look Around Mode"
Selecting a DECT System
1. In "Look Around Mode" press the "M" key repeatedly until "System" appears
2. Press Foxkey "System"
3. Use the Foxkey ">" to select the system designation
4. Confirm with Foxkey "OK"
Tip:
Long-click 1 to change the system.
Tab. 3: Significance of the system designation:
Designation Icon
A, B, C, D A, B, C, D
E E
Test T
Xall X
Note:
The selected system is permanently saved and is maintained even after switching
off the HA.
Planning DECT systems
Meaning
Systems of the valid HA
logons
Saved system
Test system
All systems
Ascotel® DECT System
Note
Only visible if the handset is registered in
these systems
Visible only if a system was previously saved
(see section "Saving a System
Contains only the visible test RUs in
measuring mode
Contains all visible RUs
ID:")
47