Aastra Ascotel IntelliGate A150 System Manual page 49

Selecting an RU:
The first found RU is automatically displayed after starting the scan procedure. If
more than one RU is found, another RU can be selected with Foxkey ">" or "<".
Alternately, pressing digit keys 1..8 (for system T) or 1..9 or 0 for 10 (for all other
systems) directly selects a specific RU from the list.
Saving a System ID:
After scanning all systems (X), the RUs of the different systems are listed unsorted.
To display only the visible RUs of a particular system, the required system ID is saved
under the system designation "E" and then selected:
1. In "Look-around mode" across all systems (X) press the "M" key
2. Press the Foxkey "Store->E" (Note: The menu item appears only after the scan
procedure is completed.)
3. Select an RU of the desired system with Foxkey ">" or "<"
4. Confirm with Foxkey "OK"
5. Press Foxkey "System"
6. Select system designation "E" with Foxkey ">"
7. Confirm with Foxkey "OK"
8. The scan procedure starts automatically and only the RUs with this system ID
are displayed in the list.
Note:
The selected system is permanently saved and is maintained even after switching
off the HA.
1)
Possible only with test HA
Planning DECT systems
Ascotel® DECT System
1)
49