Logging A Handset Onto The System - Aastra Ascotel IntelliGate A150 System Manual

Ascotel® DECT System
5.2

Logging a handset onto the system

Tab. 12: Procedure for logging a handset on to the PBX
Procedure
1. Prepare handset
for logon.
2. Prepare PBX for
logon.
3. Log handset on.
4. Wait for
confirmation.
Handsets defined in the PBX as Ascotel DECT subscribers but not yet logged on are
identified as follows:
• With an * in the numbering plan
• With "DECT not logged on" in the subscriber configuration.
A GAP handset subscriber must also identify himself on the Ascotel DECT system
with an access code. The access code must be entered in the PBX and in the GAP
handset prior to the logon procedure.
70
Input in AIMS
• Select the subscriber
number in the DECT
system configuration
• "Select "Log Ascotel DECT
subscriber on"; the logon
procedure is started on
the PBX side.
Input on
handset
– not logged on
anywhere
(ABCD flashing on the
display).
Switch handset off.
Switch handset on.
Logon is carried out
automatically.
"OK" confirmation on
the display.
Input on
handset
– already logged on
elsewhere
Prepare handset as per
Operating Instructions up to
the step with the display
"Home" / "GAP"
Press Foxkey under
"New"; the handset is
checked for authorization
and then assigned its
subscriber number and any
group membership (user
group).
"OK" confirmation on the
display.
Configuration