Table of Contents
Advertisement
1.1
Safe Use of the Product
For the safety of the operator and to protect the instrument and the system, please
be sure to follow this manual's safety instructions when handling this instrument. If
these instructions are not heeded, the protection provided by this instrument may
be impaired. In this case, Yokogawa cannot guarantee that the instrument can be
safely operated. Please pay special attention to the following points:
(a) Installation
WARNING
• The instrument must be installed by expert engineer or skilled
personnel. The procedures described about INSTALLATION are not
permitted for operators.
• In case of high process temperature, care should be taken not to
burn yourself because the surface of body and case reaches a high
temperature.
• The instrument installed in the process is under pressure. Never loosen
the process connection to avoid the dangerous spouting of process fluid.
• During draining condensate from the pressure detector section,
take appropriate care to avoid contact with the skin, eyes or body, or
inhalation of vapors, if the accumulated process fluid may be toxic or
otherwise harmful.
• When removing the instrument from hazardous processes, avoid
contact with the fluid and the interior of the meter.
• All installation shall comply with local installation requirement and local
electrical code.
• When handling with the instrument, avoid intense vibration and shock.
In particular care should be taken not to drop the instrument because it
may result in damage.
Rated energy: 1J
Testing method: Drop 500g wrecking ball from 20cm above.
<Introduction>
IM 01W06F01-01EN
1-4
Advertisement
Table of Contents
