For The Safe Use Of This Equipment - YOKOGAWA PH8EHP User Manual

For the safe use of this equipment


n Safety, Protection, and Modification of the Product
• In order to protect the system controlled by the product and the product itself and ensure
safe operation, observe the safety precautions described in this user's manual. We assume
no liability for safety if users fail to observe these instructions when operating the product.
• If this instrument is used in a manner not specified in this user's manual, the protection
provided by this instrument may be impaired.
• Be sure to use the spare parts approved by Yokogawa Electric Corporation (hereafter simply
referred to as YOKOGAWA) when replacing parts or consumables.
• Modification of the product is strictly prohibited.
• The following symbols are used in the product and user's manual to indicate that there are
precautions for safety:
Notes on Handling User's Manuals
n
• Please hand over the user's manuals to your end users so that they can keep the user's
manuals on hand for convenient reference.
• Please read the information thoroughly before using the product.
• The purpose of these user's manuals is not to warrant that the product is well suited to any
particular purpose but rather to describe the functional details of the product.
• No part of the user's manuals may be transferred or reproduced without prior written
consent from YOKOGAWA.
• YOKOGAWA reserves the right to make improvements in the user's manuals and product at
any time, without notice or obligation.
• If you have any questions, or you find mistakes or omissions in the user's manuals, please
contact our sales representative or your local distributor.
Warning and Disclaimer
n
The product is provided on an "as is" basis. YOKOGAWA shall have neither liability nor
responsibility to any person or entity with respect to any direct or indirect loss or damage arising
from using the product or any defect of the product that YOKOGAWA can not predict in advance.
Compliance with the simple apparatus requirements
n
PH8EHP meet the simple apparatus requirements defined in the following standards.
Note: TIIS certified types cannot be connected.
Use the sensors under the conditions of use required by the standards.
Applicable standards:
ANSI/ISA-60079-11 (2014)
ANSI/ISA-60079-0 (2009)
CAN/CSA-C22.2 NO. 60079-11:14
CAN/CSA-C22.2 NO. 60079-0:11
방호장치 의무안전인증 고시
GB 3836.4-2010
< Introduction >
IM 12B7J2-01E 11th Edition : Nov.20,2018-00
ii