7-2
<Maintenance>
7.3
Replacing the XS530
When replacing the XS530, follow the procedure below.
Import the XS530 setting using Sushi Sensor App.
Remove the installed XS530 (Refer to Chapter 4).
Remove the XS110A from the XS530 being replaced and install it on the
new XS530 (4 Chapter).
Export the settings acquired in to the new XS530.
Configure the XS530 network settings.
Install XS530 to the location (Refer to Chapter 4).
For how to set up XS530 and how to use the Sushi Sensor App, refer to
"IM01W06C01-01EN".
IM 01W06F01-01EN