Volkswagen Amarok 2011 Service & Maintenance page 9

2.1.2 Cleaning filling device -VAS 6542-
– Open both cut-off taps -3- and -6- and clean or rinse all parts
of filling device for AdBlue -VAS 6542- under running water.
2.1.3 Clean sealing surfaces on oil filter hous‐
ing and oil filter cover
– Clean sealing surfaces on threaded cap and on oil filter hous‐
ing with a non-fibrous, lint-free cloth (for example universal
cloth -VAS 6385- ).
Note
Ensure that no engine oil comes into contact with coolant ho‐
♦
ses or other engine parts or painted parts. If necessary, clean
hoses immediately.
Observe disposal regulations!
♦
2.1.4 Cleaning sliding window seals
– Remove all dirt and dust from the seals of the sliding window
and from the contact surfaces of the sliding window seals, us‐
ing a soft sponge or a non-fibrous and lint-free cloth (for
example universal cloth -VAS 6385- ) and normal rinsing wa‐
ter.
Note
After cleaning, treat the sliding window seals using a commer‐
cially available anti-soiling rubber care product.
2.1.5 Cleaning electro-hydraulic 3-way tipper
– Before undoing connections, thoroughly clean them and their
surroundings with a non-fibrous, lint-free cloth (for example
universal cloth -VAS 6385- ).
– Place removed parts on a clean surface and cover them with
a non-fibrous, lint-free cloth (for example universal cloth -VAS
6385- ).
– Carefully cover opened components with a non-fibrous, lint-
free cloth (for example universal cloth -VAS 6385- ).
Amarok 2011 ➤
Maintenance - Edition 10.2012
2. General rules of cleanliness
5