Reading Radio Code - Volkswagen Amarok 2011 Service & Maintenance

Loosening anti-theft wheel bolts.
Note
To loosen the theft-resistant wheel bolts a special adapter is re‐
quired, located in vehicle tool kit or use adapter set for tamper-
proof wheel bolts -T10101- or adapter set for tamper-proof wheel
bolts -T10190-
– Push adapter -2- into anti-theft wheel bolt -1- onto stop.
– Push wheel brace onto adapter -2- onto stop.
– Unscrew wheel bolt by about one turn.
Screw in wheel bolts hand-tight and then tighten to prescribed
torque setting.
Note
Ensure that wheel bolts are tightened diagonally and alternately
to the following specified torque:
Specified torque: 180 Nm
– Place puller hooks and adapter with vehicle tool kit after com‐
pleting work.
5.37

Reading radio code

Note
Only valid for vehicles without sticker with serial number and radio
code on vehicle data sticker.
Reading radio code using vehicle diagnostic, testing and infor‐
mation system -VAS 5051B- or vehicle diagnostic and service
information system -VAS 5052 A-
Authorization prerequisites for reading radio code
• The vehicle diagnostic, testing and information system -VAS
5051B- or vehicle diagnostic and service information system
-VAS 5052 A- is connected via the "Central Partner
Network" (CPN) with the central database (Carport, Fazit).
• Available access for the user of the system "GeKo" (secrecy
and component protection)
Note
The radio codes are read in the central database (Carport,
♦
Fazit) and are indicated on display of vehicle diagnostic, test‐
ing and information system -VAS 5051B- or vehicle diagnostic
and service information system -VAS 5052 A- .
To activate the anti-theft coding the radio code must be en‐
♦
tered using radio buttons, as previously
Perform the following jobs:
– Connect vehicle diagnostic, testing and information system -
VAS 5051B- or vehicle diagnostic and service information
system -VAS 5052 A- with ignition switched off
⇒ page 133 .
⇒ page 102 .
Amarok 2011 ➤
Maintenance - Edition 10.2012
5. Descriptions of work
131