Volkswagen Amarok 2011 Service & Maintenance page 124

Amarok 2011 ➤
Maintenance - Edition 10.2012
– Loosen bolts -arrows- of air filter cover.
– Raise air filter upper part and remove upwards.
– Remove air filter element -1-.
– Clean air filter housing if necessary.
Installing
Perform the following jobs:
– Install new air filter insert -1-.
– Remove all caps or hood covers from sealed components.
Note
When installing ensure the air filter element -1- is properly seated
in housing and check if seal is seated securely and completely.
Note
When installing air filter upper part, ensure that the seal of air filter
element is not moved or trapped and that both parts of housing
are flush.
– Tighten bolts -arrows- of air filter cover.
Specified torque: 1.6 ± 0.2 Nm.
– Push on intake hose -5- and secure clamp -4-.
Torque setting: 5.5 Nm.
– Push vacuum hose -3- onto air filter cover -6-.
– Then push connector -1- onto intake air temperature sender -
G42- and connector -2- onto air mass meter -G70- .
120
5. Descriptions of work