Rules Of Cleanliness During Work With Information Material "Maintenance Manual - Volkswagen Amarok 2011 Service & Maintenance

Amarok 2011 ➤
Maintenance - Edition 10.2012
2.3 Rules of cleanliness during work with in‐
formation material "Maintenance Man‐
ual"
Special tools and workshop equipment required
♦ Drip tray for V.A.G 1202 -V.A.G 1306/-
♦ Universal cloth -VAS 6385-
♦ Non-fibrous lint-free cloths
♦ Commercially available screw tap
Removing tyre sealant from wheel rim
Care and treatment of alloy wheels
Cleaning tyre pressure sensor/wheel rim
Cleaning work on brake system
2.3.1 Removing tyre sealant from wheel rim
WARNING
Do not allow tyre sealant to come into contact with eyes or skin!
It is damaging to health and can cause eye irritation and aller‐
gies.
During assembly work, wear protective gloves and goggles.
– Using a suitable drill or cutter, carefully make a hole in the
shoulder area of the tyre.
– Hold wheel over drip tray and allow sealant to flow out.
– Remove tyre from wheel rim.
– Clean wheel rim with a damp cloth, for example.
2.3.2 Care and treatment of alloy wheels
Note
After cleaning or removing adhesive residue from the wheels, the
wheels must be rinsed with water again.
16
2. General rules of cleanliness
⇒ page 16
⇒ page 16
⇒ page 17
⇒ page 17