Set Sleep And Power Down Timer; Real-Time Clock (Rtc); Set The Date And Time - Honeywell RP2 User Manual

Set Sleep and Power Down Timer

The RP Series printer display enters sleep mode after 1 minute of inactivity. Press
any button to wake. The printer shuts down after 120 minutes of inactivity unless it
is charging. The sleep and shutdown periods can be adjusted or disabled.
1. Turn the printer on and connect it to the computer using the USB cable.
2. Open the NETira
3. Go to System Settings, then Printer Sleep Timeout to adjust the sleep

Real-Time Clock (RTC)

The Real-Time Clock (RTC) is powered from a rechargeable coin cell. Once the RTC
is set, and as long as the main battery is in place and has a reasonable charge, the
RTC will continue to keep time. If the main battery is pulled, the time setting is
retained for 6 months. After 6 months the time will be lost and will need to be reset
once power is restored.

Set the Date and Time

To view the current date and time:
1. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
2. Select Printer Information.
3. View the current RTC date and time stamp in the Printer Date Time section.
To change the date and time:
1. Click on Tools - Printer Diagnostics to open the Select a Date and Time win-
2. Click on Set Date.
3. Set the date and time fields and click OK.
RP2/RP4 User Guide
™
CT Printer Configuration Utility Tool.
settings, or Printer Power Down Timeout to adjust the shutdown settings.
Query Printer Configuration (or press CTRL-q) to query the printer.
dow.
27