Connection Via Bluetooth - RadioLink T8S User Manual

(fhss) 8-channel remote controller

Hide thumbs Also See for T8S:

Table of Contents

Radiolink Electronic Ltd

www.radiolink.com

Step 4: Turn on Bluetooth on Android phone

3.2 Connection

1. When the installation of parameter setup app is complete, short press the power button to turn on T8S

2. Click

to enter the APP, a message will pop out to ask for permission to turn on the Bluetooth

function.

3. Click CONNECT on the top left of the parameter setup interface, a list of devices will pop out for selection.

4. Select RADIOLINK device, the two led indicators on the right (above the RadioLink logo on T8S) will flash

with DEE DEE sounds.

5. Press any of the trimmer buttons to stop the DEE sounds and the servo range will be displayed on the APP

as picture shown on right, meaning connection between the APP and T8S succeed.

* If fail, please repeat the above steps to try again.

Table of Contents