Chapter 3 Parameters Setup Via Mobile; Android App Installation; Connection - RadioLink T8S Instruction Manual

Radiolink Electronic Ltd
www.radiolink.com

Chapter 3 Parameters Setup via Mobile

3.1 Android APP Installation

Scan the QR code on the right or choose the file RadiolinkT8FB/T8S.APK
in the zip file downloaded via
https://mega.nz/#F!sVESQSwR!65d0382IOAXwMz2uHcPZCg
and install into an Android phone.
Note The version of T8S parameters setup APP is only available on
Android mobiles with V4.0 or above.

3.2 Connection

When the installation of parameter setup app is complete, power on T8S then connect it with the
phone as below picture shown. the mobile will show a USB port is connected. Click confirm and enter
APP interface.
Note The smaller head of the USB cable connects with T8S while the bigger head connects with OTG
cable. The smaller head of the OTG cable connects the mobile.
The OTG cable should connect with the mobile, otherwise T8S can ' t be connect with the APP
successfully.
Some smart-phones (eg. OPPO R9s) need to open the OTG function to ensure successful connection
(settings - Other settings - OTG Connection)
8