Chapter 3 Parameters Setup Via Mobile; Android App Installation; Connection Via Bluetooth - RadioLink T8S User Manual

3.1 APP Installation
Android APP: Visit
https://www.radiolink.com/t8s_apps
android app to setup T8S parameters by Bluetooth connection.
Apple APP: Search T8S in Apple store and download.
Android APP
Different from the current Apple App, the current Android APP has two more programmable mixing controls,
Throttle Curve and DR Curve parameter setup menus and customizable RSSI/Model Voltage Alarm.
* Latest APPs with new functions added will be updated regularly, please always take the version on
https://www.radiolink.com/t8s_apps
3.2 APP Connection
Connection of both Android APP and Apple APP to T8S are the same as below:
1) When the installation of parameter setup APP is complete, press the power button to turn on T8S
2) Click
3) Click CONNECT on the top left of the parameter setup interface, a list of devices will pop out for selection.
4) Select RadioLink device, the two LED indicators at rightmost will flash with DD sounds.
5) Press any of the trimmer buttons to stop the DD sounds and the servo range will display on the APP,
meaning connection between the APP and T8S succeed.
* If fail, please repeat the above steps to try again.
Chapter 3 Parameters Setup via Mobile APP
as the latest.
to enter the APP, a message will pop out to ask for permission to turn on the Bluetooth
function.
to download the
Apple APP
5
Radiolink Electronic Ltd
www.radiolink.com