Advanced Menu - RadioLink T8S User Manual

(fhss) 8-channel remote controller
Hide thumbs Also See for T8S:
Table of Contents

Advertisement

Note
The setting of the throttle F/S also applies to the low battery voltage. F/S value 0 means throttle stick at the
lowest point while 50 means at the central point.
The F/S (Fail-safe) function is used in certain competitions to ensure safety landing of the model prior to flying
away and dropping. Conversely, it can also be used make all servos neutral to maximize the flight time.
DELAY: Adjusts the synchronous ratio between the servos position and the actual operation. The default value
is 100 by factory setting meaning no delay.

3.3.3 ADVANCED Menu

There are four parameters to setup: "D/R" "ATTITUDE" "ELEVON" "V-TAIL"
D/R: Sets the auxiliary switch to control the max and min values of corresponding channel range. Turn on
"MIX" (mix control) first and choose an auxiliary switch to flip and set the max/min range value to its
corresponding channel by toggling. In the example picture shown above: When flip SWA upward and toggle
CH1 stick , it means the max/min range of CH1 can be +100 and -100. If the UP value modified to 50, it means
the max range can only be +50/-50 when toggle CH1 up and down. 'DOWN" means when flip SWA downward,
the max/min value of CH1 is +100/-100.
ATTITUDE: Turn on "CH" first and select the preferred channel from CH5 through CH8. CH5 is always the
default switch to change attitude when connect to flight controller PIXHAWK/MINI PIX/APM/TURBO PIX
while CH7 is default when connect to DJI flight controller. For the default channel to switch attitudes,
please refer to the flight controller user manual.
The values behind each channel means different control percentage output different control signals. The
default values of T8S of each attitude is corresponding to the values of flight controller PIXHAWK/MINI
PIX/APM/TURBO PIX. That is, when the above flight controllers are used with T8S, attitude can be selected
on the Mission Planner and no need to setup specific parameter.
ELEVON: Turn on "MIX" (mix control) first, adjust the aileron distance and allow aileron differential.
ADJUSTABILITY:
• CH1 and CH2 are required.
• Independently adjustable aileron travel allows aileron differential.
10
Radiolink Electronic Ltd
www.radiolink.com

Advertisement

Table of Contents
loading

Table of Contents