BMW M3 SEDAN Owner's Manual page 71

As an alternative for Steps 1 and 2, the profile
image can be tapped in the top status bar.
3. Select driver profile.
4. "Settings"
5. Enter a profile name.
6. Select the symbol.
ConnectedDrive countries:
The name of the driver profile is transferred from
the ConnectedDrive account. Changes for the
profile name must be made in the Connected‐
Drive account.
Selecting a profile picture
Non-ConnectedDrive countries:
1. "CAR"
2. "Driver profiles"
3. Move the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4. "Avatar"
5. Select the desired profile picture.
Deleting the driver profile
1. "CAR"
2. "Driver profiles"
3. Move the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4. "Settings"
5. "Remove driver profile"
6. Select the desired driver profile.
7. "Delete now"
ConnectedDrive countries: If the driver profile
was synchronized with a ConnectedDrive ac‐
count, the stored data in the ConnectedDrive ac‐
count will be retained.
Online Edition for Part no. 01405A1E4B0 - X/20
Personal settings
System limits
A clear detection of the desired vehicle key may
not be possible in the following cases, e.g.:
▷ The driver unlocks the vehicle via Comfort
Access.
▷ The driver changes, but the vehicle is not
locked and unlocked.
▷ When multiple vehicle keys are located out‐
side on the driver's side of the vehicle.
ConnectedDrive countries:
A driver profile can only be created and
synchronized with the ConnectedDrive account
when cellular network reception is available.
The use of personal settings that are stored in
the ConnectedDrive account in other vehicles is
subject to technical limitations. For example, set‐
tings may be stored for a system that is not avail‐
able, or available in a non-compatible version, in
other vehicles.
CONTROLS
71