BMW M3 SEDAN Owner's Manual page 231

Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the road
is clear.
▷ Each time the rocker switch is pressed to the
resistance point, the desired speed increases
or decreases by 1 mph/1 km/h.
▷ Each time the rocker switch is pressed past
the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the
action.
Adjusting the distance
Safety information
Warning
The system cannot serve as a substitute for the
driver's personal judgment. Due to the system
limits, braking can be late. There may be a risk
of accident or risk of damage to property. Be
aware to the traffic situation at all times. Adjust
the distance to the traffic and weather condi‐
tions and maintain the prescribed safety dis‐
tance, possibly by braking.
Reduce distance
Press the button repeatedly until the
desired distance is set.
Driver assistance systems
Online Edition for Part no. 01405A1E4B0 - X/20
Instrument cluster will display selected distance.
Increase the distance
Press the button repeatedly until the
desired distance is set.
Instrument cluster will display selected distance.
Automatic adaptation of the
distance
Depending on the equipment and national-mar‐
ket version: the system can be adjusted so that
the distance is automatically adjusted within the
configured distance level according to the traffic
situation or the ambient condition, for instance
poor visibility.
The adjustment of the distance is shown in the
display in the instrument cluster.
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. If necessary, "Driving"
5. "Speed Limit Assistance"
6. "Adjust distance acc. to situation"
Continuing cruise control
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, uninten‐
tional braking or accelerating may occur.
Press the button on the steering wheel with the
system interrupted:
With steering and traffic jam assistant.
Without steering and traffic jam assis‐
tant.
Cruise control is continued with the stored val‐
ues.
CONTROLS
231