BMW M3 SEDAN Owner's Manual page 203

Setting the intensity of the steering
wheel vibration
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. "Steering Wheel Feedback"
5. "Vibration intensity"
6. Select the desired setting.
The setting is applied to all Intelligent Safety sys‐
tems and stored for the driver profile currently
used.
Warning function
Light in the exterior mirror
Acute warning
If there is a risk of collision, the light in the exte‐
rior mirror flashes and the steering wheel vi‐
brates.
A Check Control message is displayed at the
same time.
If necessary, an active steering intervention takes
place to prevent the collision and maintain the
vehicle within its own lane.
The steering intervention can be noticed on the
steering wheel and can be manually overridden
at any time.
Online Edition for Part no. 01405A1E4B0 - X/20
Safety
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er's Manual regarding the scope of the sys‐
tem's operation and limitations.
System limits of the sensors
Additional information:
▷ Cameras, refer to page 35.
▷ Radar sensors, refer to page 36.
Functional limitations
The system may not be fully functional in the fol‐
lowing situations:
▷ When a vehicle is approaching at a speed
much faster than your own.
▷ In tight curves or on narrow lanes.
▷ In the event of missing, worn, poorly visible,
merging, diverging, or multiple lane markings
such as in construction areas.
▷ When lane markings are covered in snow, ice,
dirt or water.
▷ When lane markings are covered by objects.
▷ When driving very close to the vehicle in front
of you.
▷ Up to 10 seconds after the start of the engine
via the Start/Stop button.
A Check Control message is displayed when the
system is not fully functional.
CONTROLS
203