BMW M3 SEDAN Owner's Manual page 232

CONTROLS
In the following cases, the stored speed value is
deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Changing between cruise control
with/without distance control
Safety information
Warning
The system does not react to traffic driving
ahead of you, but instead maintains the stored
speed. There may be a risk of accident or risk
of damage to property. Adjust the desired
speed to the traffic conditions and brake as
needed.
Switch mode of the cruise control
Switching cruise control without distance control
off and on:
▷ Press and hold this button.
▷ Press and hold this button.
With steering and traffic jam assistant: switch on
distance control:
Press the button.
Without steering and traffic jam assistant: switch
on distance control:
▷ Press the button.
▷ Press the button.
After switching, a Check Control message is dis‐
played.
232
Driver assistance systems
Online Edition for Part no. 01405A1E4B0 - X/20
Displays in the instrument
cluster
General information
Depending on the equipment version, the dis‐
plays in the instrument cluster may vary.
Display in the speedometer
▷ Green marking: system is ac‐
tive, the marking indicates the
desired speed.
▷ Grey marking: system is inter‐
rupted, the marking indicates
the stored speed.
▷ No marking: system is switched off.
Distance to vehicle ahead of you
Selected distance to the vehicle ahead of you is
shown.
Symbol Description
Distance 1
Distance 2
Distance 3