BMW M3 SEDAN Owner's Manual page 267

Switching the function on/off
Switching on/off with other
functions
1. "CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. Select the desired setting:
▷ "All services incl. analysis"
▷ "All vehicle services"
Switching on/off individually
Pre-adjustment
1. "CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. "Select services individually"
6. "Connected App and cust. portal"
7. "Remote 3D View"
Switching on/off
1. "CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. "Individual selection"
System limits of the sensors
Additional information:
▷ Cameras, refer to page 35.
Functional limitations
The system may not be fully functional or may
not be available in the following situations:
Driver assistance systems
Online Edition for Part no. 01405A1E4B0 - X/20
▷ With a door or the trunk lid open. Dark fields
in the display indicate areas that are not re‐
corded by the system.
▷ With exterior mirrors folded in.
▷ When other camera functions are being per‐
formed in the vehicle.
▷ When the vehicle moves faster than walking
speed.
▷ It may not be possible to use the function in
every country.
▷ For reasons of data protection, the function
can only be used three times within two
hours.
Cross traffic warning
Concept
At blind driveways or when driving out of diago‐
nal parking spaces, approaching cross traffic is
detected sooner by the system than is possible
from the driver's seat.
General information
Two radar sensors in the rear bumper monitor
the area behind the vehicle.
The system indicates approaching traffic.
Depending on the vehicle equipment, the traffic
area in front of the vehicle is monitored as well.
Two additional radar sensors are located in the
front bumpers.
CONTROLS
267