BMW M3 SEDAN Owner's Manual page 229

Button Function
Without steering and traffic jam assis‐
tant:
Pause cruise control.
Increase the distance.
Switch distance control on/off.
Reduce distance.
Switch distance control on/off.
Rocker switch:
Set speed.
Sensors
The system is controlled by the following sen‐
sors:
▷ Cameras behind the windshield.
▷ Front radar sensor.
Additional information:
Sensors of the vehicle, refer to page 35.
Area of application
The system is best used on well-constructed
roads.
The minimum speed that can be set is
20 mph/30 km/h.
The maximum speed that can be set is limited
and, e.g., depends on the vehicle and the vehicle
equipment version.
The system can also be activated when station‐
ary.
Driver assistance systems
Online Edition for Part no. 01405A1E4B0 - X/20
Switching on/off and interrupting
cruise control
With steering and traffic jam
assistant: Assisted Driving Mode
General information
This button is used to switch the config‐
ured function on and off.
The button can be used to set the pri‐
marily used function.
Set function
When the system is active, press the
button repeatedly until the desired func‐
tion is selected in the function bar. The function
bar for Assisted Driving mode is displayed at the
bottom of the instrument cluster.
Symbol Function
Cruise control with distance control.
Depending on the equipment ver‐
sion, cruise control with distance
control and steering and traffic jam
assistant.
The selected function is shown in green.
The setting is stored for the driver profile cur‐
rently used.
Switching on
With steering and traffic jam assistant:
1. Press the button on the steering
wheel.
2. If necessary, set the cruise control.
Without steering and traffic jam assistant:
CONTROLS
229