BMW M3 SEDAN Owner's Manual page 66

CONTROLS
7. Turn the Controller until the desired bright‐
ness is set.
8. Press the Controller.
The setting is stored for the driver profile cur‐
rently used.
Depending on the light conditions, the bright‐
ness settings may not be clearly visible.
Resetting the vehicle
configuration
All individual settings can be reset to the factory
settings when the drive-ready state is switched
off.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Reset vehicle data"
5. "Reset vehicle data"
When the stored settings in a driver profile are
synchronized with the ConnectedDrive account,
these settings will remain in the ConnectedDrive
account.
Messages
Concept
The menu centrally displays all messages arriv‐
ing in the vehicle in list form.
General information
The following messages can be displayed:
▷ Traffic messages.
▷ Check Control messages.
▷ Messages on service notifications.
▷ Communication messages, for example e-
mails, SMS text messages or reminders.
66
General settings
Online Edition for Part no. 01405A1E4B0 - X/20
▷ Messages from, e.g., the Concierge service
or the BMW Connected app.
▷ Messages from the vehicle manufacturer.
The number of messages is additionally dis‐
played in the status field.
The Messages menu can also be created as
Widget.
Retrieving messages
1. Tip the Controller up.
2. "Notifications"
3. Select the desired message.
Deleting messages
All messages, except Check Control messages
or messages from the vehicle manufacturer, can
be deleted from the list.
Check Control messages or messages from the
vehicle manufacturer are displayed as long as
they are relevant.
1. Tip the Controller up.
2. "Notifications"
3. Select desired message, for instance. SMS.
4. Press the button.
5. ▷ "Delete this notification"
▷ "Delete all notifications"
Settings
The following settings can be adjusted:
▷ Select the applications, from which mes‐
sages will be permitted.
▷ All messages or a limited time period for re‐
ceived messages.
1. Tip the Controller up.
2. "Notifications"
3. Move the Controller to the right.
4. "Settings"
5. Select the desired setting.