BMW M3 SEDAN Owner's Manual page 226

CONTROLS
DSC Dynamic Stability Control is switched on, if
necessary.
Switching off
Depending on the equipment version,
press the relevant button on the steer‐
ing wheel.
The displays go out. The stored desired speed is
deleted.
Pausing cruise control
Interrupting manually
When active, press the button.
Interrupting automatically
The system is automatically interrupted in the
following situations, for example:
▷ When the driver applies the brakes.
▷ Manual transmission: when the clutch pedal
is depressed for a few seconds or released
while a gear is not engaged.
▷ Manual transmission: when the gear engaged
is too high for the current speed.
▷ Steptronic transmission: when selector lever
position D is disengaged.
▷ When M Dynamic Mode MDM is activated or
DSC Dynamic Stability Control is deactivated.
▷ If DSC Dynamic Stability Control intervenes.
226
Driver assistance systems
Online Edition for Part no. 01405A1E4B0 - X/20
Setting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
The stored speed is displayed on the speedom‐
eter.
DSC Dynamic Stability Control is switched on, if
necessary.
The speed can also be stored by pressing a but‐
ton.
Press the button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the road
is clear.