BMW M3 SEDAN Owner's Manual page 202

CONTROLS
use. There is a risk of accident. Adjust driving
style to traffic conditions. Watch traffic closely
and actively intervene where appropriate.
Functional requirement
The camera must detect the lane markings for
the side collision mitigation with steering inter‐
vention to be active.
Overview
Button in the vehicle
Intelligent Safety
Sensors
The system is controlled by the following sen‐
sors:
▷ Cameras behind the windshield.
▷ Radar sensors, side, front.
▷ Radar sensors, side, rear.
Additional information:
Sensors of the vehicle, refer to page 35.
Switching on/off
Switching on automatically
The side collision mitigation activates automati‐
cally after departure if the function was switched
on at the end of the last trip.
202
Safety
Online Edition for Part no. 01405A1E4B0 - X/20
Switching on manually
Press the button.
The menu for the Intelligent Safety sys‐
tem is displayed.
If all Intelligent Safety systems were switched off,
all systems are now switched on.
"Configure INDIVIDUAL": depending on the
equipment version, the Intelligent Safety sys‐
tems can be individually configured. The individ‐
ual settings are activated and stored for the
driver profile currently used. As soon as a setting
is changed on the menu, all settings of the menu
are activated.
Press the button repeatedly.
The following settings are switched be‐
tween:
"ALL ON": all Intelligent Safety systems are
switched on. Basic settings are activated for the
subfunctions.
"INDIVIDUAL": the Intelligent Safety systems are
switched on according to the individual settings.
Some Intelligent Safety systems cannot be indi‐
vidually switched off.
Manual switching off
Press and hold this button.
All Intelligent Safety systems are
switched off.
Button Status
Button lights up green: all Intelligent
Safety systems are switched on.
Button lights up orange: some Intelli‐
gent Safety systems are switched off
or currently unavailable.
Button does not light up: all Intelligent
Safety systems are switched off.