BMW M3 SEDAN Owner's Manual page 173

Activating/deactivating
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. Select the desired setting:
▷ "Welcome and goodbye"
When unlocking the vehicle, individual
light functions are switched on for a lim‐
ited time.
▷ "Door handle lights"
Door handles and the ground in front of
the doors are illuminated for a limited
time.
Pathway lighting
General information
For the illumination of the vehicle's surroundings
after exiting the vehicle, the exterior lighting can
be switched on for a defined period of time.
Activating
After switching off the drive-ready state, briefly
push the indicator lever forward.
Setting the duration
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. "Pathway lighting"
5. Select the desired setting.
6. "OK"
Daytime running lights
General information
The daytime running lights light up when drive-
ready state is switched on.
Online Edition for Part no. 01405A1E4B0 - X/20
Lights
Activating/deactivating
In some countries, daytime running lights are
mandatory, so it may not be possible to deacti‐
vate the daytime running lights in front.
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. Depending on country specifications:
"Daytime driving lights" or "Daytime driving
lights, rear"
The setting is stored for the driver profile cur‐
rently used.
Adaptive light functions
Concept
Adaptive light functions enable dynamic illumina‐
tion of the roadway.
General information
The adaptive light functions may consist of one
system or multiple systems, depending on the
equipment version:
▷ Adaptive Light Control.
▷ Cornering light.
Activating
Press the button on the light switch ele‐
ment.
The LED in the button lights up.
The adaptive light functions are active when the
drive-ready state is switched on.
CONTROLS
173