BMW M3 SEDAN Owner's Manual page 145

Observe the display in the instrument cluster in
these cases.
Displays in the instrument
cluster
Drive mode
▷ Engaged gear together with a
D, arrow 1.
▷ Selected Drivelogic program,
arrow 2.
Sequential mode
▷ Gear shift indicator, arrow 1.
▷ Engaged gear, arrow 2.
▷ Selected Drivelogic program,
arrow 3.
Notice
When the external temperature is very low, the
display may not work. Current driving direction is
recognizable at the engaged selector lever posi‐
tion.
Low Speed Assistant
Concept
The Low Speed Assistant gives assistance at
very low speeds. The vehicle moves at walking
speed.
General information
Use the Low Speed Assistant for maneuvering or
in stop-and-go traffic.
The Low Speed Assistant can also be used for
rocking the vehicle in the snow. To do this, shift
between reverse gear and forward gear without
stepping on the brakes in the process.
Online Edition for Part no. 01405A1E4B0 - X/20
Driving
Activating
1. Switch on drive-ready state while pressing on
the brake pedal.
2. If necessary, release the parking brake.
3. If necessary, deactivate Automatic Hold.
4. Engage selector lever position D/S or R.
5. Release brake.
In 1st and 2nd gear and in reverse, the vehicle
rolls at minimum speed.
Deactivating
Apply the brakes until the vehicle comes to a
stop.
Drivelogic
Concept
Drivelogic changes the gear-shifting characteris‐
tics of the M Steptronic Sport transmission.
For example, the shifting points are changed in
Drive mode and the shifting times in sequential
mode.
General information
Three Drivelogic programs are available.
After each switch between Sequential mode and
Drive mode, the last program selected is an ac‐
tive.
If the drive-ready state is switched on after the
vehicle has been in the idle state and is in Drive
mode, the D1 program is activated.
CONTROLS
145