BMW M3 SEDAN Owner's Manual page 212

CONTROLS
Safety information
Warning
Depending on the setting, the DSC may only
be available to a limited extent or may not be
available when the M1 or M2 button is acti‐
vated. There may be a risk of accident or risk of
damage to property. Heed the settings for DSC
in iDrive and react actively, if necessary. Modify
your driving style and react, if necessary.
Settings
The settings for the following systems can be
stored in buttons M1 or M2:
Sym‐ Meaning
bol
"Engine": programs of M Engine Dy‐
namics Control, refer to page 147.
M Steptronic Sport transmission:
"Transmission": shift modes and
Drivelogic programs.
Drivelogic, refer to page 145.
Manual transmission:
"Gear Shift Assist.": RPM change at
gear change.
Gear Shift Assistant, refer to
page 140.
"Chassis": programs of Adaptive M
suspension, refer to page 270.
"Steering": programs of Servotronic,
refer to page 215.
"Brake": programs of brake, refer to
page 216.
"DSC": Dynamic Stability Control,
DSC, refer to page 216, and M Dy‐
namic Mode, MDM, refer to
page 217.
212
Driving stability control systems
Online Edition for Part no. 01405A1E4B0 - X/20
Sym‐ Meaning
bol
Depending on the equipment: "M
Traction Control": M Traction Control,
refer to page 219.
"Start/Stop": Auto Start/Stop function,
refer to page 130.
"Sound Control": Sound Control, refer
to page 148.
Overview
Buttons on the steering wheel
Button Function
M1
M2
Button in the center console
SETUP
Configuration
Via iDrive
1. "CAR"
2. "M menu"
3. "Configure M1" or "Configure M2"