BMW M3 SEDAN Owner's Manual page 28

QUICK REFERENCE
With tires that cannot be found in the tire pres‐
sure values on the Control Display, reset the Tire
Pressure Monitor TPM.
Checking the tire inflation pressure
Regularly check the tire inflation pressure and
correct it as needed:
▷ At least twice a month.
▷ Before embarking on an extended trip.
Cleaning the wheels
The friction during hard braking may produce
brake dust and make the rims dirty. Brake dust
can be removed by cleaning the rims. BMW rec‐
ommends using vehicle care and cleaning prod‐
ucts from BMW.
Electronic oil measurement
Functional requirements
A current measured value is available after ap‐
prox. 30 minutes of normal driving with the com‐
bustion engine running.
Displaying the engine oil level
1. "CAR"
2. "Vehicle status"
3. "Engine oil level"
Different messages appear on the Control Dis‐
play depending on the engine oil level. Pay atten‐
tion to these messages.
Adding engine oil
General information
Safely park the vehicle and switch off drive-ready
state before adding engine oil.
28
On the road
Online Edition for Part no. 01405A1E4B0 - X/20
Adding engine oil
Only add engine oil when the message is dis‐
played in the instrument cluster.
Observe the quantity to be added in the mes‐
sage.
Take care not to add too much engine oil.
Observe recommended engine oil types.
Providing assistance
Hazard warning flashers
The button is located in the center console.
Breakdown assistance
BMW Roadside Assistance
1. "APPS"
2. "Installed apps"
3. "BMW Assist"
4. If necessary, "BMW Roadside Assistance"
A voice connection is established.