BMW M3 SEDAN Owner's Manual page 21

Memory function
Concept
The following settings can be stored and, if nec‐
essary, retrieved using the memory function:
▷ Seat position.
▷ Exterior mirror position.
▷ Height of the Head-up Display.
Storing
1. Set the desired position.
2. Press button on the door. The writ‐
ing on the button lights up.
3. Press the desired button 1 or 2 at the door
while the writing is lit. A signal sounds.
Calling up settings
Press the desired button 1 or 2.
Infotainment
Radio
1 Changing the entertainment source
2 Sound output on/off, volume
3 Programmable memory buttons
4 Changing the station/track
5 Waveband/satellite radio
Online Edition for Part no. 01405A1E4B0 - X/20
Set-up and use
Navigation destination input
Entering a destination via quick
search
1. Press the button on the Controller.
2. "Where to?"
3. Enter at least two letters or characters.
The search term may be completed automat‐
ically in gray print.
Press or move the controller up to apply the
suggested search term.
4. Select the symbol, if needed.
Results are displayed in a list.
5. "Search location": select search area.
6. Move the Controller to the right.
7. Select desired destination.
Connecting a mobile phone
General information
After the mobile phone is connected once to the
vehicle, the mobile phone can be operated using
iDrive and the steering wheel buttons.
Connecting the mobile phone via
Bluetooth
1. "COM"
2. If necessary, select the following setting:
"Telephone"
3. "Connect new phone"
4. To perform additional steps on the mobile
phone, refer to the mobile phone owner's
manual: e.g., search for or connect the Blue‐
tooth device or a new device.
The Bluetooth name of the vehicle appears
on the mobile phone display. Select the Blue‐
tooth name of the vehicle.
5. Depending on the mobile device, a control
number is displayed or the control number
must be entered.
QUICK REFERENCE
21