Boot - Lex System 2I392CW Manual

4-8 Boot

Boot type
The boot type only work in UEFI Boot mode.
Quiet Boot
The optional settings are: Enabled (default), Disabled.
Network Stack
If use PXE function need enable otherwise disable (default)
PXE Boot capability
The item determines what protocol operation in PXE, these values are: Disabled (default), UEFI: IPv4,
UEFI: IPv6
This is not modifying item. When above item settings disable.
EFI
Determine which EFI storage device too booting. If storage no EFI system that will not shows on the page.
77