Lex System 2I392CW Manual page 38

How to use this Demo Application
one F75111 two F75111
Attention Please: You must be install vcredist_x86.exe when fi rst time you run the
F75111_DIO.exe DEMO AP,The vcredist_x86.exe include all required DLL fi le.
WARNING: win7 system architecture, use the system administrator to open DIO utility
1. Press the "Start" button to test DIO function
2. Press the "Enable" button to test WDT function
3. Press the "Disable" button to disable WDT
4. Check the "Enable Loop" box and press "Enable" to do WDT loop test
5. Press "Install WDT" to set the system to autorun this application when booting,
press again to remove this application when booting.
6. If WDT enable, system icon will be . if disable, system icon will be
34