Password; Alert Tone - Henny Penny GVE-071 Operator's Manual

5-3

PASSWORD

5-4

ALERT TONE

(AND VOLUME)
July 2014
The 4-digit passwords can be changed for access to Set-Up, Usage,
Level 1, Level 2, & Get Mgr.)
1.
Press and hold and
display, followed by ENTER CODE.
2.
Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD" and
"COMP" show in the displays.
3.
Press ▼ button twice and "PASSWORD" shows in the display.
4.
Press right button and "SET UP" shows in display. The Set up
√
password can be changed at this time, or press ▼ once to change
the USAGE password, twice for LEVEL 1 password, 3 times for
LEVEL 2 password, or 4 times for GET MGR password. And then,
follow instructions below.
5.
If the password for the Set Up Mode (for example) is to be
changed, press right
√
shows in the display. Press right
password for the Set Up Mode, using the product buttons
6.
Once new password is entered, "CONFIRM PASSWORD" shows
in the display. Press
√
another password.
1.
Press and hold and
the display, followed by "ENTER CODE".
2.
Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD" and
"COMP" show in the displays.
3.
Press ▼ button 3 times and "ALERT TONE" shows in the display.
4.
Press right button and "VOLUME" shows in the display,
√
along with the volume value. Use the product buttons
(loudest).
5.
Once volume is set, press
display, along with the tone value. Use the product buttons
6.
Press X to exit Alert Tone Mode.
40
buttons until LEVEL - 2 shows in the
button and "MODIFY? "YES NO"
button to change the 4-digit
√
.
button to confirm, or press X to choose
buttons until "LEVEL - 2" shows in
to set the volume from 1 (softest) to 10
button and "TONE" shows in
√
to set the tone from 50 to 2000 Hz.