Table of Contents
Advertisement
4
Select the transition type with the buttons in the transition type selection
section.
• For a dissolve: press the MIX button, turning it on.
• For a wipe or DME wipe: press the WIPE or DME button, turning it
on.
5
Make the necessary settings, depending on the selected transition type.
• For a dissolve: See "Mix Settings" (page 4-7).
• For a wipe: See "Wipe Settings" (page 4-8).
• For a DME wipe: See "DME Wipes" (page 4-21).
For menu operations, see "Notational Conventions" (page 1-5) and
"Menu Operation Block" (page 3-6).
6
Use the transition control section to execute the transition.
• For a gradual transition such as a wipe or dissolve: press the AUTO
TRANS button, or use the fader lever.
• For an instantaneous transition: press the CUT button.
For more details, see the section "Executing a Transition" (page 4-4).
Chapter 4 Basic Operations for Switching
4-3
Advertisement
Table of Contents
