Table of Contents
Advertisement
Adjusting the color cancel key
Adjust the key signal for the color cancel function as follows:
1
In the chroma key main menu, select F3 (MANUAL).
A submenu (level 1) appears.
2
In page 1/2 of the submenu, select F3 (COLCAN).
A submenu (level 2) appears. This menu comprises two pages, 1/2 and 2/
2. Pressing F6 (MORE) toggles between these two pages.
3
Press F2 (COLCAN), turning it on, and use the control knobs for F3 to
F5 to adjust the blue background color.
4
Press F6 (MORE), to display page 2/2 of the COLCAN menu.
5
Select one of F2 to F5.
• F2 (CANKEY): Adjust the color cancel key signal.
• F3 (Y BAL): Adjust the proportions for adding a Y balance key to the
color cancel key.
• F4 (WINDOW): Adjust the color cancel key detection range.
• F5 (POS): Adjust the color cancel key edge position.
6
Select the required item, and adjust the parameters as necessary.
Chapter 6 Chroma Keying
6-9
Advertisement
Table of Contents
