NKE Multigraphic User Manual & Installation Sheet page 90

V2.3 22/06/2016
V2.4 31/10/2018
V2.6 02/2020
V2.7 09/2020
Note: If you don't understand some points, or have some suggestions to improve this
documentation, you can fill a note on https://www.nke-marine-electronics.fr/ Thank
you for your contribution.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations:
Hand in the non-working electrical equipment
to an appropriate waste disposal center.
Fixed a bug of the race timer.
-
Fixed a bug of the keypad lock.
-
- Fixed a bug of the alarm buzzer.
Management of the dynamic channels.
-
- Possibility of inhibit keypad bip.
Management of shortcuts A B C D.
-
Compatibility with Pads, Multidisplay, Compas 9x and Wind
-
monitor.
Addition of the radar scale 24mn.
-
- Addition of AIS alarm 1mn / 5min.
AIS alarm on the bus.
-
- Removal of the decimal on wind directions.
Addition of the standby command by shortcut
-
New theme with Multidisplay colors (Black White)
-
- Resolution from bearing to Waypoints Mag without decimal.
Adding the channel Waypoints angle (difference between
-
COG and BTW)
Taking into account the unit length depth in meters or feet in
-
the tactical and departure page.
Course data on the tactical page in True or magnetic
-
Correction of the calculation of TCPA, CPA.
-
- Compatibility with Processor HR 4.2
Fixed the bug displaying the depth in alarm.
-
90 50_Afficheur_Multigraphic_um_UK_27