Auxiliary Inputs - NKE Multigraphic User Manual & Installation Sheet

2.7.6.2 Auxiliary inputs

2.7.6.2.1 Console
The Multigraphic has a NMEA console allowing NMEA input data to be displayed.
Access to the NMEA console:
+
Or
2.7.6.2.2 NMEA settings
The Multigraphic features a NMEA0183 input which allows any compatible
instrument (GPC, PC...)to be connected. This port converts any NMEA incoming
data to Topline channels if they do not already exist on the Topline bus. The data
will be used by the Topline system. Baud rate is automatically detected between
4800 or 38400 Bauds.
Note: NMEA data coming from an A.I.S receiver connected to the Multigraphic
NMEA input is directly available on the Multigraphic and does not require set up.
NMEA input settings:
+
+
+
40 50_Afficheur_Multigraphic_um_UK_27