Components Needed - Raven AccuBoom Parallel Installation Manual

Components
Needed
Congratulations on your purchase of the Raven AccuBoom system! This
system is designed to provide worry free turn-on and turn-off of your
booms with respect to the as-applied coverage map. The following
instructions are designed to assist you in the proper installation of the
AccuBoom system. See the Viper Installation and Operators Manual for
instructions on setting up the software and using the AccuBoom system.
You will also need a valid AccuBoom Control Activation Key for your
Viper system in order to activate the AccuBoom system.
Important!
the OFF position while AccuBoom control is in
operation!
• Parallel AccuBoom Control Node - P/N 063-0172-517
• Hagie with 4600 Console Series AccuBoom Cable - P/N 115-0171-630
• AccuBoom Control Activation Key - P/N 077-0180-010
Manual # 016-0171-030 Rev A 03/06
I
N T RO D U C T I O N
All boom switches must remain in
C
H A P T E R
1