Components Needed - Raven AccuBoom Installation Manual

For terragator with liquid bed

Hide thumbs Also See for AccuBoom:

SECTION 1

INTRODUCTION

Congratulations on your purchase of the Raven AccuBoom system! This system is

designed to provide worry free turn on and turn off of your booms with respect to the as-

applied coverage map. The following instructions are designed to assist you in the proper

installation of the AccuBoom system. See the Viper Installation and Operation Manual

for instructions on setting up the software and using the AccuBoom system. You will also

need a valid AccuBoom Control activation key for your Viper in order to activate the

AccuBoom system.

IMPORTANT: All boom switches must remain in the

position while AccuBoom control is in operation!

COMPONENTS NEEDED

Terragator with Liquid Bed Kit P/N 9-117-0171-079 including:

CAN AccuBoom Control Node – P/N 063-0172-316

AccuBoom Software Activation Key – P/N 077-0180-010

Terragator With Liquid Bed AccuBoom Cable – P/N 115-0171-701

CAN Tee Cable 12 foot – P/N 115-0171-362

AccuBoom Installation Sheet, Terragator With Liquid Bed – 016-0171-062

Table of Contents