Safety Instructions - Weinmann SOMNOcomfort 2e Description Of The Equipment And Instructions For Use

Cpap unit
Table of Contents

Advertisement

2. Safety Instructions

Please read these operating instructions through carefully. They form part of the equip-
ment and should be available at all times.
For your own safety, the safety of your patients, and to comply with the requirements of EU
Directive 93/42/EEC, please observe the following points.
2.1 Safety instructions
Operating the unit
Caution!
The power pack supplied allows the unit to be operated at voltages be-
tween 115 V and 230 V. Check that your supply voltage falls within this
range. With a 12 V DC or 24 V DC supply, use the WM 24469 DC adapt-
er available as an accessory.
Do not cover the unit or power pack. Do not use in the vicinity of a heater
or in direct sunlight. The unit may overheat, resulting in insufficient ther-
apy delivery and damage to the unit.
Maintain a safe distance between the SOMNOcomfort 2e and equip-
ment that emits HF radiation (e.g. mobile phones). This unit may other-
wise malfunction (see page 42). If the SOMNOcomfort 2e interferes with
other devices (e.g. a radio), move the SOMNOcomfort 2e further away.
Caution!
Do not use the therapy unit or humidifier if the unit is malfunctioning,
parts are damaged and/or the contact between the humidifier and the
heater rod is damp.
The performance of the humidifier can be affected if it is used outside
the permitted temperature range.
Observe the operating instructions for your mask.
Please observe the section "5. Hygienic preparation" on page 25 to
avoid infection or bacterial contamination.
Safety Instructions
11
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

SomnoaquaWm 24405Wm 24455

Table of Contents