banks PowerPDA 61100 Owner's Manual With Installation Instructions page 37

d. Check for vehicle OBD II diagnostic
codes by going to the Banks
PowerPDA's 'OBDII Codes' screen
and touching 'Check for Codes'.
If any diagnostic codes are
present, troubleshoot/repair the
cause. Once the cause is properly
remedied, touch 'Clear Codes' and
then 'Check for Codes' again to
verify the problem is fixed (the ODB
II code should not re-appear).
e. Re-verify the 'OttoMind6 Tuning'
parameters to make sure the loss
of added fueling is not caused
by improper settings of these
parameters. Pressing 'Restore All'
will set the OttoMind6 Tuner back
to factory defaults.
f. Refer to the OttoMind6 Tuner
user's manual for further
troubleshooting details.
-END, SECTION 16-
37
96803 v.3.0