banks PowerPDA 61100 Owner's Manual With Installation Instructions page 25

screen press the center button on the
5-way navigator. This will take you to
the System Menu screen.
2.
Touch the 'System Monitor' button.
3.
On the 'Choose System Monitor'
screen, there will be three choices
for display (See Figure 38). Choose
between the Hist-O-Graph (default)
(See Figure 39), Vertical Bar Graph
(See Figure 40 and the Horizontal Bar
Graph. (See Figure 41). The bottom of
the page displays the Current Monitor
Figure 38
Figure 39 Hist-O-Graph
'Status' and the '<Back' button.
The '<Back' button takes you to the
previously viewed screen. Select the
button corresponding to the System
Monitor screen that you choose to be
the active screen. Check the 'Status'
line to verify the correct screen is
selected.
4.
Touch the '<Back' button twice to
return to the System Monitor screen.
-END, SECTION 8-
Figure 40 Verticle Bar
Figure 41 Horizontal Graph
25
96803 v.3.0