Section 1; Charging The Pda - banks PowerPDA 61100 Owner's Manual With Installation Instructions

Section 1

CHARGING THE PDA

The Palm Tungsten E2 will need to be
charged for a minimum of one hour
before the unit will function. The Palm
Tungsten E2 can be charged either by
the supplied AC-outlet wall charger
or by the integrated charging cable
in the Docking Station. The unit will
be fully charged in one to two hours.
After a minimum charge of one hour,
press the power button to turn on the
Banks PowerPDA. (See Figure 1 and
Figure 2 Top view
EXPANSION SLOT
Figure 3
2) Follow the on-screen instructions
to set-up the Palm Tungsten E2 The
Palm Tungsten E2 will ask for time,
date, time zone and require that you
perform an on-screen stylus accuracy
test. (See Figure 3 and 4). Once initial
setup is complete the Palm Tungsten
E2 will be ready for the Banks
PowerPDA software installation.
-END, SECTION 1-
POWER BUTTON
Figure 4
5
96803 v.3.0