banks PowerPDA 61100 Owner's Manual With Installation Instructions page 14

22.
Refit the dash panel and knee
panel by carefully snapping them back
into place. Tuck any excess cable
behind it for a clean appearance. (See
Figure 21)
23.
Your Docking Station is now
installed and is ready for the
Banks PowerPDA. Install the Banks
PowerPDA into the Docking Station.
Be sure the Banks PowerPDA is
completely seated in the Docking
Figure 18 Dodge
Figure 19 Dodge
14
96803 v.3.0
Station against the lower support
bracket.
24.
Plug the Docking Station's
charging cable into the charging
receptacle on the lower edge of the
Banks PowerPDA.
NOTE: There may be a snug fit when
installing the Banks PowerPDA into the
Docking Station. Take care not to force
this process.