Table of Contents
Advertisement
Wiring
5.6 Connecting the control terminals (screw terminals)
5.6
Connecting the control terminals (screw terminals)
Requirements
Observe the conductor cross-sections and tightening torques in the data sheet or on the
front of the 3RW52 soft starter beneath the hinged cover.
Pay attention to the required tools indicated on the front of the 3RW52 soft starter
beneath the hinged cover.
Procedure
Hazardous voltage.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before working on this device.
Illustration similar
Example circuits
Control by pushbutton (Page 221)
Control by switch (Page 222)
Switching with supply voltage (control supply voltage) (Page 224)
Control by PLC (Page 226)
Actuation of a line contactor (Page 228)
Wiring for remote RESET (Page 230)
Connecting the temperature sensor (Page 231)
Connecting the evaluation unit to the analog output (Page 232)
88
DANGER
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
SIRIUS 3RW52 Soft Starter
Advertisement
Table of Contents
